Kayak Transom Trolling Motors For Power Pole Ready Kayaks
Variable Speed Motors
Variable Speed Motors
Kayak Transom Motor Fit Micro Power Pole Ready Inserts
|
Exclusively Designed For the Kayak Owner with a Power Pole ready kayak, Who Owns a Power Pole and Want a Transom Mounted Trolling Motor.
Includes mounting plate which screws into Power Poles inserts with four stainless screws provided. Installs within seconds. Remove slip pin for quick removal and storage. Power Pole Sold Separately. |
Variable Speed Transom Mount Trolling Motor for Power Pole Ready Kayaks
Item # 95-07760-PP-VS
Item # 95-07760-PP-VS
Transom Variable Speed Trolling Motor for Use w/ Power Pole
Item # 95-07760-PP-VS
Includes trolling motor with intergraded circuit board, customized mounting bracket which will accept Power Pole Power, handheld remote with infinite forward and reverse speed, heavy gauged battery cable, lithium ion plug, motor lifting cord kit, slip pin for quick and easy removal and storage, and all stainless steel hardware required for quick installation for brands with direct integration for Power Pole system. No access hatch or rudder system required. Remote control is hand held.
Note: For kayaks without a rudder system, you must order with Navigate w/ Steering Handle Option
Note: For kayaks with rudder system, you will remove rudder, but leave cables in place, and order Navigate w/ Kayaks Rudder Cables Option. Exception to kayaks that have rudders under the kayak, in this case, you'll receive a steering handle with order.
Battery Compatible: Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Power Pole Kit not included. These transom mount kits are custom made and considered, special order for Power Pole Ready Kayaks.
Item # 95-07760-PP-VS
Includes trolling motor with intergraded circuit board, customized mounting bracket which will accept Power Pole Power, handheld remote with infinite forward and reverse speed, heavy gauged battery cable, lithium ion plug, motor lifting cord kit, slip pin for quick and easy removal and storage, and all stainless steel hardware required for quick installation for brands with direct integration for Power Pole system. No access hatch or rudder system required. Remote control is hand held.
Note: For kayaks without a rudder system, you must order with Navigate w/ Steering Handle Option
Note: For kayaks with rudder system, you will remove rudder, but leave cables in place, and order Navigate w/ Kayaks Rudder Cables Option. Exception to kayaks that have rudders under the kayak, in this case, you'll receive a steering handle with order.
Battery Compatible: Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Power Pole Kit not included. These transom mount kits are custom made and considered, special order for Power Pole Ready Kayaks.
Understanding Conventional Trolling Motors and Variable Speed Trolling Motors
Conventional Trolling Motors are the most commonly used motor for boating and kayaking. They are cost affective and are equipped with 5 forward / 2 reverse speeds. They are primarily designed to propel you quickly to your desired destination or fishing hole, and then reposition your boat or kayak when currents or wind blow you off course.
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
Variable Speed Trolling Motors are one of the most improved technology today. Boaters and kayakers are gravitating to trolling motors with variable speeds due to their many benefits,
Benefits of Variable Speed Include:
- Infinite Speed Range of "0-100 speed forward and reverse", which allows for trolling at very low speeds for hours without affecting any speeds of the motor.
- A Micro Processer aka (Pulse Width Modulator) to increase battery range 3 to 4 times, allowing for hours of continuous trolling.
- Controlled Amperage provides steady trolling in currents and wind while conserving battery at 95% efficiency.
- Integrated Electronic Board System senses over and undercharge of voltage, eliminates voltage spikes, 95% efficiency in power and torque.
- Soft start: no spooking of fish while trolling and lighter in weight than conventional trolling motors,
Battery Compatible: Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Benefits of Variable Speed Include:
- Infinite Speed Range of "0-100 speed forward and reverse", which allows for trolling at very low speeds for hours without affecting any speeds of the motor.
- A Micro Processer aka (Pulse Width Modulator) to increase battery range 3 to 4 times, allowing for hours of continuous trolling.
- Controlled Amperage provides steady trolling in currents and wind while conserving battery at 95% efficiency.
- Integrated Electronic Board System senses over and undercharge of voltage, eliminates voltage spikes, 95% efficiency in power and torque.
- Soft start: no spooking of fish while trolling and lighter in weight than conventional trolling motors,
Battery Compatible: Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Lithium Iron - LiFeP04 Compatible Trolling Motors - For LiFeP04 Battery Use
These motors are designed to be used with LiFeP04 battery and built with an intergraded circuit board which regulates the voltage and allows speed adjustments in fractional increments, from 1/4 to 5 mph. This motor includes heavy gauged wire, auto reset fuse, lithium-ion plug, which handles 60 to 200 amp LiFePO4 batteries.
These motors are designed to be used with LiFeP04 battery and built with an intergraded circuit board which regulates the voltage and allows speed adjustments in fractional increments, from 1/4 to 5 mph. This motor includes heavy gauged wire, auto reset fuse, lithium-ion plug, which handles 60 to 200 amp LiFePO4 batteries.
Understanding Lithium-Ion (LiFePO4) Battery & Their Effect On Conventional Trolling Motors vs Trolling Motors with Intergraded Circuit Board
LiFePO4 batteries were designed to be light weight and pack more energy. LiFePO4 batteries were engineered to store as much voltage from solar panels.
The stored voltage is unregulated and will burnout conventional trolling motors or shorten their lifespan, because the collected volts are too high (+18 volts = 12.8 - 16.0 volts DC), whereas conventional trolling motors operate on regulated 12 volts. Therefore, to regulate the LiFePO4 batteries voltage output, a trolling motor requires an intergraded circuit board to control speed and regulate the voltage, along with a heavy gauged battery cable, lithium-ion plug and an auto reset fuse.
Trolling motors with intergraded circuit board tend to have a longer lifespan and extended fishing time while kayaking. Read More
LiFePO4 batteries were designed to be light weight and pack more energy. LiFePO4 batteries were engineered to store as much voltage from solar panels.
The stored voltage is unregulated and will burnout conventional trolling motors or shorten their lifespan, because the collected volts are too high (+18 volts = 12.8 - 16.0 volts DC), whereas conventional trolling motors operate on regulated 12 volts. Therefore, to regulate the LiFePO4 batteries voltage output, a trolling motor requires an intergraded circuit board to control speed and regulate the voltage, along with a heavy gauged battery cable, lithium-ion plug and an auto reset fuse.
Trolling motors with intergraded circuit board tend to have a longer lifespan and extended fishing time while kayaking. Read More
|
Island Hopper Transom Motors for Power Pole ready kayaks, are pre-assembled and ready to install with in moments.
Add your Power Pole to our Transom Mount, which has been designed just for Power Pole. No modification needed to kayak or mounting plate. Just add your Power Pole and a battery, and you'll be on your way to a fun filled day with motorized comfort navigating and anchoring. Includes Tilt Kit, which allows the motor to limited tilting for easy beaching. (tilting range is limited due the pole) |
|
|
Island Hopper Transom Motors for Power Pole ready kayaks, is guaranteed to fit: Jackson Kayaks Kaku Kayaks Perception kayaks Hobie Kayak Bonafide Kayaks Native Kayaks Bote Kayaks |
Customers Who Bought This Item Also Bought
|
Item # 33-4567
Mounting Bracket for Remote Control Mounts to kayak, allows remote control to pivot for ease of use. Includes two stainless steel self-tapping screws. This item can only be ordered when ordering any transom trolling kits. |
Sale Price
$12.99 |
|
Item # 33-4509
Cord Guide for Lift Kit Cord. Cord bracket guide mounts to kayak, assists the lift cord by keeping the cord in place. Includes two stainless steel self-tapping screws. |
Sale Price
$7.99 |
 |
Item # 83699
35ah AGM Battery 12volt Approx. size: 9" x 8" x 6" (may vary slightly by 1" on all side) Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use. Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. *Additional battery info Click Here |
Sale Price
$89.99
|
|
Item # 33-8765
Protect your investment with an Auto Reset Fuse. High quality reset circuit breaker. These circuit breakers feature an automatic self reset. **Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse. |
Sale Price
$19.99 |
|
Item # 88-4324
Battery & Charger Add a Battery & Battery Charger Choose a AGM / Deep Cycle or Lithium ion / Lifepo4 Battery Charger with a 35ah AGM Sealed Battery |
|
Transom Mount with Steering Handle Navigation - for Installing into Power Pole Insert
Easy installation transom mount kits that are dependable and will fit kayak brands with direct integration for Power Pole systems. Transom Mount trolling motors have been engineered to be installed directly into the Power Pole insert with four stainless screws provided, with no modification to kayak. No unsightly wires, just two flexible cables: one to the remote control box and one to the battery terminals. The motor and shaft are low in profile and compact in size making it easy for removal and storage. Power Pole Sold Separately.
Easy installation transom mount kits that are dependable and will fit kayak brands with direct integration for Power Pole systems. Transom Mount trolling motors have been engineered to be installed directly into the Power Pole insert with four stainless screws provided, with no modification to kayak. No unsightly wires, just two flexible cables: one to the remote control box and one to the battery terminals. The motor and shaft are low in profile and compact in size making it easy for removal and storage. Power Pole Sold Separately.
Tilting Feature Allows the Tilting of Motor
We added a remote tilting feature to tilt the motor while sitting in your kayak, which assists in clearing obstacles seen and unseen, at no additional costs.
Since all transom mounts tend to trail lower than the keel of the kayak, in addition to the installation of the Power Pole, the tilting range is limited due the pole.
We added a remote tilting feature to tilt the motor while sitting in your kayak, which assists in clearing obstacles seen and unseen, at no additional costs.
Since all transom mounts tend to trail lower than the keel of the kayak, in addition to the installation of the Power Pole, the tilting range is limited due the pole.
Telescoping Steering Handle for Easy of Navigation
Our system allows the kayak to steer using the telescoping handle. The steering handle is adjustable to meet the different kayak lengths. No altering of cables or kayak. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust.
Our system allows the kayak to steer using the telescoping handle. The steering handle is adjustable to meet the different kayak lengths. No altering of cables or kayak. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust.
Fresh & Saltwater Trolling Motors, 32 lbs, 46 lbs, 55 lbs Thrust of Power Available
We offer several models for fresh water and salt water use, and the Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible
We offer several models for fresh water and salt water use, and the Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible
*Speeds: 5 Speeds Forward / 3 Speeds Reverse, Three Bade Propeller
The motors have a selectors switch, 1-5 speeds forward and 3 reverse. The three blade machete propeller is included with 55lbs trolling motors. The two blade machete propeller are included with 46lbs and 32lb trolling motors. The machete propeller allows for more torque to push the kayak forward in choppy waters or windy conditions, in addition, to cut through weeds and debris with minimal fouling.
The motors have a selectors switch, 1-5 speeds forward and 3 reverse. The three blade machete propeller is included with 55lbs trolling motors. The two blade machete propeller are included with 46lbs and 32lb trolling motors. The machete propeller allows for more torque to push the kayak forward in choppy waters or windy conditions, in addition, to cut through weeds and debris with minimal fouling.
Our Transom Power Drive Systems Are Guaranteed
|
Other Stern, Rear, Transom Kayak Trolling Motor Kits Click Here
|
.
|
For sales and technical support, call (727) 501-3116
Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.
|
Battery Disclaimer Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries.
|