Kayak Transom Motors
- Navigate with Foot Pedals - OR - Navigate with Steering Handle -
- Navigate with Foot Pedals - OR - Navigate with Steering Handle -
Conventional Trolling Motors are the most commonly used motor for boating and kayaking. They are cost affective and are equipped with 5 forward / 2 reverse speeds. They are primarily designed to propel you quickly to your desired destination or fishing hole, and then reposition your boat or kayak when currents or wind blow you off course.
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
Transom Mount Kits - Navigate with Steering Handle
Transom Mount Conventional Trolling Motor - Navigate with Steering Handle
Item # 62-7761 Includes conventional trolling motor with customized mounting bracket, remote controller with 5 speeds forward and 3 speeds reverse, telescoping steering handle, motor lifting cord kit, and all stainless steel hardware required for installation. Zinc anode on salt water models only. Battery Type: Deep Cycle Marine, AGM & Gel Batteries Only Note: Remote control is hand held. (Optional Mounting Bracket Sold Separately). No access hatch required. |
|
Transom Mount Conventional Trolling Motor w/ 35ah AGM Battery- Navigate with Steering Handle
Item # 62-2214 Includes conventional trolling motor with customized mounting bracket, remote controller with 5 speeds forward and 3 speeds reverse, telescoping steering handle, motor lifting cord kit, 35ah AGM battery, and all stainless steel hardware required for installation. Zinc anode on salt water models only. Battery Type: Deep Cycle Marine, AGM & Gel Batteries Only Note: Remote control is hand held. (Optional Mounting Bracket Sold Separately). No access hatch required. |
|
**Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse.
Transom Mount Kits - Navigate with Foot Pedal - Rudder Cables Required
Transom Mount Conventional Trolling Motor - Navigate with Foot Pedals
Item # 62-2500 Includes conventional trolling motor with customized mounting bracket, remote controller with 5 speeds forward and 3 speeds reverse, motor lifting cord kit, and all stainless steel hardware required for installation. Zinc anode on salt water models only. Attaches to Rudder Cables for Navigating with Foot Pedals Battery Type: Deep Cycle Marine, AGM & Gel Batteries Only Note: Remote control is hand held. (Optional Mounting Bracket Sold Separately). No access hatch required. |
|
|
Transom Mount Conventional Trolling Motor w/ 35ah AGM Battery- Navigate with Foot Pedals
Item # 62-2521 Includes conventional trolling motor with customized mounting bracket, remote controller with 5 speeds forward and 3 speeds reverse, motor lifting cord kit, 35ah AGM battery and all stainless steel hardware required for installation. Zinc anode on salt water models only. Attaches to Rudder Cables for Navigating with Foot Pedals Battery Type: Deep Cycle Marine, AGM & Gel Batteries Only Note: Remote control is hand held. (Optional Mounting Bracket Sold Separately). No access hatch required. |
|
**Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse.
Variable Speed Trolling Motors are one of the most improved technology today. Boaters and kayakers are gravitating to trolling motors with variable speeds due to their many benefits,
Benefits of Variable Speed Include:
- Infinite Speed Range of "0-100 speed forward and reverse", which allows for trolling at very low speeds for hours without affecting any speeds of the motor.
- A Micro Processer aka (Pulse Width Modulator) to increase battery range 3 to 4 times, allowing for hours of continuous trolling.
- Controlled Amperage provides steady trolling in currents and wind while conserving battery at 95% efficiency.
- Integrated Electronic Board System senses over and undercharge of voltage, eliminates voltage spikes, 95% efficiency in power and torque.
- Soft start: no spooking of fish while trolling and lighter in weight than conventional trolling motors,
Battery Compatible: Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Benefits of Variable Speed Include:
- Infinite Speed Range of "0-100 speed forward and reverse", which allows for trolling at very low speeds for hours without affecting any speeds of the motor.
- A Micro Processer aka (Pulse Width Modulator) to increase battery range 3 to 4 times, allowing for hours of continuous trolling.
- Controlled Amperage provides steady trolling in currents and wind while conserving battery at 95% efficiency.
- Integrated Electronic Board System senses over and undercharge of voltage, eliminates voltage spikes, 95% efficiency in power and torque.
- Soft start: no spooking of fish while trolling and lighter in weight than conventional trolling motors,
Battery Compatible: Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Lithium Iron - LiFeP04 Compatible Trolling Motors - For LiFeP04 Battery Use Only
These motors are designed to be used with LiFeP04 battery and built with an intergraded circuit board which regulates the voltage and allows speed adjustments in fractional increments, from 1/4 to 5 mph. This motor includes heavy gauged wire, auto reset fuse, lithium-ion plug, which handles 60 to 200 amp LiFePO4 batteries.
These motors are designed to be used with LiFeP04 battery and built with an intergraded circuit board which regulates the voltage and allows speed adjustments in fractional increments, from 1/4 to 5 mph. This motor includes heavy gauged wire, auto reset fuse, lithium-ion plug, which handles 60 to 200 amp LiFePO4 batteries.
Transom Variable Speed Trolling Motor - Navigate w/ Steering Handle
Item # 62-07761-VS-LITH Includes trolling motor with intergraded circuit board, customized mounting bracket, handheld remote with infinite forward and reverse speed, heavy gauged battery cable, lithium ion plug, telescoping steering handle, motor lifting cord kit and all stainless steel hardware required for installation. Zinc anode on salt water models only. Battery Type: LiFeP04 Batteries Only Note: Remote control is hand held. (Optional Mounting Bracket Sold Separately) (See Below) |
|
|
Transom Variable Speed Trolling Motor - Navigate with Foot Pedal
Item # 62-02500-VS-LITH Includes trolling motor with intergraded circuit board, customized mounting bracket, handheld remote with infinite forward and reverse speed, heavy gauged battery cable, lithium ion plug, motor lifting cord kit and all stainless steel hardware required for installation. Zinc anode on salt water models only. Attaches to Rudder Cables for Navigating with Foot Pedals Battery Type: LiFeP04 Batteries Only Note: Remote control is hand held. (Optional Mounting Bracket Sold Separately) (See Below) |
|
Understanding Lithium-Ion (LiFePO4) Battery & Their Effect On Conventional Trolling Motors vs Trolling Motors with Intergraded Circuit Board
LiFePO4 batteries were designed to be light weight and pack more energy. LiFePO4 batteries were engineered to store as much voltage from solar panels.
The stored voltage is unregulated and will burnout conventional trolling motors or shorten their lifespan, because the collected volts are too high (+18 volts = 12.8 - 16.0 volts DC), whereas conventional trolling motors operate on regulated 12 volts. Therefore, to regulate the LiFePO4 batteries voltage output, a trolling motor requires an intergraded circuit board to control speed and regulate the voltage, along with a heavy gauged battery cable, lithium-ion plug and an auto reset fuse.
Trolling motors with intergraded circuit board tend to have a longer lifespan and extended fishing time while kayaking. Read More
LiFePO4 batteries were designed to be light weight and pack more energy. LiFePO4 batteries were engineered to store as much voltage from solar panels.
The stored voltage is unregulated and will burnout conventional trolling motors or shorten their lifespan, because the collected volts are too high (+18 volts = 12.8 - 16.0 volts DC), whereas conventional trolling motors operate on regulated 12 volts. Therefore, to regulate the LiFePO4 batteries voltage output, a trolling motor requires an intergraded circuit board to control speed and regulate the voltage, along with a heavy gauged battery cable, lithium-ion plug and an auto reset fuse.
Trolling motors with intergraded circuit board tend to have a longer lifespan and extended fishing time while kayaking. Read More
Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use.
Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Additional battery info click here
Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Additional battery info click here
Customers Who Bought This Item Also Bought
Item # 33-4567
Remote Mounting Bracket Sale Price $12.99 |
Item # 33-4509
Cord Guide for Lift Kit Cord Sale Price $7.99 |
Item # 88-4324
35ah AGM Battery & Charger Sale Price $154.99
|
Item # 33-8765
Protect your investment with an Auto Reset Fuse (For use with AGM and Deep Cycle Batteries) Sale Price $19.99 |
Item # 33-6060
60 AMP Reset Fuse For use with 55 to 60 amp hour lithium-Ion battery. Fuse is factory installed. Sale Price $55.00 |
|
|
|
|
|
|
|
|
Lifting and lowering of trolling motor is as easy 1, 2, 3 . . .
|
|
|
Our Transom Mount Systems Are Guaranteed
For sales and technical support, call (727) 501-3116
Design, colors and images may differ from actual item
Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.
Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.
|
Battery Disclaimer Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries.
|