Kayak Variable Speed Transom Motors for Power Pole Ready Kayaks With or Without Rudder System
Exclusively Designed to Fit All Kayaks that Are Power Pole Ready.
Includes mounting plate which screws into Power Poles inserts with four stainless screws provided.
Lifts and Pivots out of water for beaching kayak.
Installs within seconds. Remove slip pin for quick removal and storage.
Includes mounting plate which screws into Power Poles inserts with four stainless screws provided.
Lifts and Pivots out of water for beaching kayak.
Installs within seconds. Remove slip pin for quick removal and storage.
Transom Mount Variable Speed Trolling Motor for Installing into Power Pole Insert
Item # 95-09541-IN-VS
Item # 95-09541-IN-VS
|
|
Native Titan with 55# Thrust Trolling Motor Installed in Power Pole Ready Kayak Inserts
|
Transom Variable Speed Trolling Motor
Item # 95-09541-IN-VS
Includes variable speed trolling motor with intergraded circuit board, customized mounting bracket and bracket for quick assembly into Power Poles Inserts, handheld remote with infinite forward and reverse speed, heavy gauged battery cable, lithium ion plug, motor lifting cord kit, slip pin for quick and easy removal and storage, and all stainless steel hardware required for quick installation for brands with direct integration for Power Pole system. Zinc anode on salt water models only. No access hatch or rudder system required.
Battery Type: LiFeP04 Batteries, Deep Cycle Marine, AGM & Gel Batteries.
Note: For kayaks without a rudder system, you must order with Navigate w/ Steering Handle Option
Note: For kayaks with rudder system, you will remove rudder, but leave cables in place, and order Navigate w/ Kayaks Rudder Cables Option. Exception to kayaks that have rudders under the kayak, in this case, you'll receive a steering handle with order.
Note: Attaches to Kayaks Rudder Cables for Navigating with Foot Pedals.
Note: Power Pole kit will not attach to this mounting option.
Note: Remote control is hand held. (Optional Mounting Bracket Sold Separately) (See Below)
Item # 95-09541-IN-VS
Includes variable speed trolling motor with intergraded circuit board, customized mounting bracket and bracket for quick assembly into Power Poles Inserts, handheld remote with infinite forward and reverse speed, heavy gauged battery cable, lithium ion plug, motor lifting cord kit, slip pin for quick and easy removal and storage, and all stainless steel hardware required for quick installation for brands with direct integration for Power Pole system. Zinc anode on salt water models only. No access hatch or rudder system required.
Battery Type: LiFeP04 Batteries, Deep Cycle Marine, AGM & Gel Batteries.
Note: For kayaks without a rudder system, you must order with Navigate w/ Steering Handle Option
Note: For kayaks with rudder system, you will remove rudder, but leave cables in place, and order Navigate w/ Kayaks Rudder Cables Option. Exception to kayaks that have rudders under the kayak, in this case, you'll receive a steering handle with order.
Note: Attaches to Kayaks Rudder Cables for Navigating with Foot Pedals.
Note: Power Pole kit will not attach to this mounting option.
Note: Remote control is hand held. (Optional Mounting Bracket Sold Separately) (See Below)
These transom mount kits are custom made and considered, special order for Power Pole Ready Kayaks
Customers Who Bought This Item Also Bought
|
Item # 33-4567
Mounting Bracket for Remote Control. Mounts to kayak, allows remote control to pivot for ease of use. Includes two stainless steel self-tapping screws. This item can only be ordered when ordering any transom trolling kits. |
Sale Price $12.99
|
|
Item # 33-4509
Cord Guide for Lift Kit Cord. Cord bracket guide mounts to kayak, assists the lift cord by keeping the cord in place. Includes two stainless steel self-tapping screws. |
Sale Price $7.99
|
 |
Item # 83699
35ah AGM Battery 12volt Approx. size: 9" x 8" x 6" (may vary slightly by 1" on all side) Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use. Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. *Additional battery info Click Here |
Sale Price $89.99
|
|
Item # 33-6060
60 AMP Reset Fuse - For use with Variable Speed Motors To prevent a meltdown or fire, we strongly recommend a #8 heavy gauge lithium ion plug in conjunction with a 60 amp. A 55 to 60 amp hour lithium-Ion battery requires a 60 amp reset fuse, Fuse will be factory installed. |
Sale Price $55.00
|
Transom Mount with Steering Handle Navigation or Foot Pedal Navigation (use with kayaks rudder cables) - for Installing into Power Pole Kayak Ready Insert
Easy installation transom mount kits that are dependable and will fit kayak brands with direct integration for Power Pole Ready systems. Transom Mount trolling motors have been engineered to be installed directly into the Power Pole insert with four stainless screws, with no modification to the kayak.
No unsightly wires, just two flexible cables: one to the remote control box and one to the battery terminals. The motor and shaft are low in profile and compact in size making it easy for removal and storage. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust. Choose from conventional or variable speed trolling motors.
Option: Telescoping Steering Handle for Easy of Navigation
Our system allows the kayak to steer using the telescoping handle. The steering handle is adjustable to meet the different kayak lengths. No altering of cables or kayak. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust.
Option: Foot Pedal Navigation (use with kayaks rudder cables)
Our system allows the kayak to navigate with our navigating arm which attaches to kayaks rudder cables for navigating. No altering of cables, just attach kayaks current rudder cables to trolling motors cables stainless steel carbineer clips.
Easy installation transom mount kits that are dependable and will fit kayak brands with direct integration for Power Pole Ready systems. Transom Mount trolling motors have been engineered to be installed directly into the Power Pole insert with four stainless screws, with no modification to the kayak.
No unsightly wires, just two flexible cables: one to the remote control box and one to the battery terminals. The motor and shaft are low in profile and compact in size making it easy for removal and storage. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust. Choose from conventional or variable speed trolling motors.
Option: Telescoping Steering Handle for Easy of Navigation
Our system allows the kayak to steer using the telescoping handle. The steering handle is adjustable to meet the different kayak lengths. No altering of cables or kayak. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust.
Option: Foot Pedal Navigation (use with kayaks rudder cables)
Our system allows the kayak to navigate with our navigating arm which attaches to kayaks rudder cables for navigating. No altering of cables, just attach kayaks current rudder cables to trolling motors cables stainless steel carbineer clips.
Lifting Feature Allows the Lifting of Motor
We added a remote lifting feature to lift the motor while sitting in your kayak, which assists in clearing obstacles seen and unseen, at no additional costs.
Since all transom mounts tend to trail lower than the keel of the kayak making it difficult to navigate in weeded waters, where sea grass, lily pods and debris is floating, as well as, running a ground, beach casting and landing and during portage, this motor lifting feature is perfect and comfortable to operate while seated.
We added a remote lifting feature to lift the motor while sitting in your kayak, which assists in clearing obstacles seen and unseen, at no additional costs.
Since all transom mounts tend to trail lower than the keel of the kayak making it difficult to navigate in weeded waters, where sea grass, lily pods and debris is floating, as well as, running a ground, beach casting and landing and during portage, this motor lifting feature is perfect and comfortable to operate while seated.
Fresh & Saltwater Trolling Motors, 32 lbs, 46 lbs, 55 lbs Thrust of Power Available
We offer several models for fresh water and salt water use, and the Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible
We offer several models for fresh water and salt water use, and the Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible
*Speeds: 5 Speeds Forward / 3 Speeds Reverse
The motors have a selectors switch, 1-5 speeds forward and 3 reverse. The three blade machete propeller is included with 55lbs trolling motors. The two blade machete propeller are included with 46lbs and 32lb trolling motors. The machete propeller allows for more torque to push the kayak forward in choppy waters or windy conditions, in addition, to cut through weeds and debris with minimal fouling.
The motors have a selectors switch, 1-5 speeds forward and 3 reverse. The three blade machete propeller is included with 55lbs trolling motors. The two blade machete propeller are included with 46lbs and 32lb trolling motors. The machete propeller allows for more torque to push the kayak forward in choppy waters or windy conditions, in addition, to cut through weeds and debris with minimal fouling.
Understanding Conventional Trolling Motors & Variable Speed Trolling Motors - Read More Below
Conventional Trolling Motors are the most commonly used motor for boating and kayaking. They are cost affective and are equipped with 5 forward / 2 reverse speeds.
They are primarily designed to propel you quickly to your desired destination or fishing hole, and then reposition your boat or kayak when currents or wind blow you off course.
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
They are primarily designed to propel you quickly to your desired destination or fishing hole, and then reposition your boat or kayak when currents or wind blow you off course.
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
Variable Speed Trolling Motors are one of the most improved technology today. Boaters and kayakers are gravitating to trolling motors
with variable speeds due to their many benefits,
Benefits of Variable Speed Include:
- Infinite Speed Range of "0-100 speed forward and reverse", which allows for trolling at very low speeds for hours without affecting any speeds of the motor.
- A Micro Processer aka (Pulse Width Modulator) to increase battery range 3 to 4 times, allowing for hours of continuous trolling.
- Controlled Amperage provides steady trolling in currents and wind while conserving battery at 95% efficiency.
- Integrated Electronic Board System senses over and undercharge of voltage, eliminates voltage spikes, 95% efficiency in power and torque.
- Soft start: no spooking of fish while trolling and lighter in weight than conventional trolling motors,
Battery Compatible: Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Lithium Iron - LiFeP04 Compatible Trolling Motors - For LiFeP04 Battery Use Only
These motors are designed to be used with LiFeP04 battery and built with an intergraded circuit board which regulates the voltage and allows speed adjustments in fractional increments, from 1/4 to 5 mph. This motor includes heavy gauged wire, auto reset fuse, lithium-ion plug, which handles 60 to 200 amp LiFePO4 batteries.
with variable speeds due to their many benefits,
Benefits of Variable Speed Include:
- Infinite Speed Range of "0-100 speed forward and reverse", which allows for trolling at very low speeds for hours without affecting any speeds of the motor.
- A Micro Processer aka (Pulse Width Modulator) to increase battery range 3 to 4 times, allowing for hours of continuous trolling.
- Controlled Amperage provides steady trolling in currents and wind while conserving battery at 95% efficiency.
- Integrated Electronic Board System senses over and undercharge of voltage, eliminates voltage spikes, 95% efficiency in power and torque.
- Soft start: no spooking of fish while trolling and lighter in weight than conventional trolling motors,
Battery Compatible: Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Lithium Iron - LiFeP04 Compatible Trolling Motors - For LiFeP04 Battery Use Only
These motors are designed to be used with LiFeP04 battery and built with an intergraded circuit board which regulates the voltage and allows speed adjustments in fractional increments, from 1/4 to 5 mph. This motor includes heavy gauged wire, auto reset fuse, lithium-ion plug, which handles 60 to 200 amp LiFePO4 batteries.
Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.
Micro Power Pole Compatible Kayak Transom Motor
Our Transom Power Drive Systems Are Guaranteed
For sales and technical support, call (727) 501-3116
|
Battery Disclaimer Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries.
|