Kayak Trolling Motors for Hobie Kayaks & Kayak Trolling Motor Mounts For All Hobie Kayaks
  • Kayaks by Brand
  • Kayak Transom Motors
  • Kayak Trolling Motors
  • Kayak Trolling Motor Mount
  • Power Pole Transom Motor
  • Gallery
  • Kayak Outriggers & Leaning Post
  • Battery & Charger
  • Kayak Gas Motor Kit
  • DIY Kayak Transom Kits
  • LiFeP04
  • Accessories
  • Home
Picture
Kayak Transom Variable Speed Trolling Motors for Power Pole Ready Native Kayaks
Native Propel Titan, Native Propel Slayer Max & Slayer XC Kayaks With or Without Rudder System
Exclusively Designed for Native Kayak with a Power Pole ready kayak, Who Owns a Power Pole and Want a Transom Mounted Trolling Motor.
Includes mounting plate which screws into Power Poles inserts with four stainless screws provided.  Installs within seconds. 
​
Remove slip pin for quick removal and storage. Power Pole Sold Separately. 
Variable Speed Trolling Motors are one of the most improved technology today. Boaters and kayakers are gravitating to trolling motors with variable speeds due to their many benefits,
Benefits of Variable Speed Include:
- Infinite Speed Range of "0-100 speed forward and reverse", which allows for trolling at very low speeds for hours without affecting any speeds of the motor. 
- A Micro Processer aka (Pulse Width Modulator) to increase battery range 3 to 4 times, allowing for hours of continuous trolling.
- Controlled Amperage provides steady trolling in currents and wind while conserving battery at 95% efficiency.
- Integrated Electronic Board System senses over and undercharge of voltage, eliminates voltage spikes, 95% efficiency in power and torque.
- Soft start: no spooking of fish while trolling and lighter in weight than conventional trolling motors,
​Battery Compatible:  Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Lithium Iron - LiFeP04 Compatible Trolling Motors - For LiFeP04 Battery Use Only ​
These motors are designed to be used with LiFeP04 battery and built with an intergraded circuit board which regulates the voltage and allows speed adjustments in fractional increments, from 1/4 to 5 mph. This motor includes heavy gauged wire, auto reset fuse, lithium-ion plug, which handles 60 to 200 amp LiFePO4 batteries.
​Transom Variable Speed Trolling Motor for Power Pole Ready Native Kayaks - Navigate w/ Steering Handle
Item # 80-7780-PP-VS-LITH
Includes trolling motor with intergraded circuit board, customized mounting bracket which will accept Power Pole Power, handheld remote with infinite forward and reverse speed, heavy gauged battery cable, lithium ion plug, telescoping steering handle, motor lifting cord kit, slip pin for quick and easy removal and storage, and all stainless steel hardware required for quick installation for brands with direct integration for Power Pole system.   Zinc anode on salt water models only.    No access hatch or rudder system required.   Remote control is hand held. (Optional Mounting Bracket Sold Separately) (See Below). Battery Type:  LiFeP04 Batteries Only
These transom mount kits are custom made and considered, special order for Bonafide Power Pole Ready Kayaks.
Variable Speed Transom Mount for Native w/ PP Inserts - Handle
Year & Model of Kayak
Please Provide Telephone #

​Transom Variable Speed Trolling Motor for Power Pole Ready Native Kayaks   - Navigate w/ Kayaks Rudder  
​
Item # 80-2580-PP-VS-LITH
Includes trolling motor with intergraded circuit board, customized mounting bracket which will accept Power Pole Power, handheld remote with infinite forward and reverse speed, heavy gauged battery cable, lithium ion plug,, motor lifting cord kit, slip pin for quick and easy removal and storage, and all stainless steel hardware required for quick installation for brands with direct integration for Power Pole system.   Zinc anode on salt water models only.    No access hatch or rudder system required.   Remote control is hand held. (Optional Mounting Bracket Sold
Separately) (See Below).  
Removal of existing rudder is not necessary on Native Propel Kayaks. For Power Pole Ready Native kayak with rudder
.
Battery Type:  LiFeP04 Batteries Only

These transom mount kits are custom made and considered, special order for Bonafide Power Pole Ready Kayaks .
Variable Speed Transom Mount for Native w/ PP Inserts - Rudder
Year & Model of Kayak
Please Provide Telephone #

Island Hopper Transom Motors for Power Pole ready kayaks, are pre-assembled and ready to install with in moments.  Add your Power Pole to our Transom Mount, which has been designed just for Power Pole.  No modification needed to kayak or mounting plate.  Just add your Power Pole and a battery, and you'll be on your way to a fun filled day with motorized comfort navigating and anchoring.   ​Includes kit, which allows the motor to tilt for easy beaching. (tilting range is limited due the pole) 

Picture


Video shows an Island Hopper 55lbs. Transom Motor w/ Micro Pole.  Due to size and girth of Native kayaks, a 55lbs trolling motor is recommended​

Customers Who Bought This Item Also Bought

Picture
Item # 33-4567
Mounting Bracket for Remote Control
​
Mounts to kayak, allows remote control to pivot for ease of use. Includes two stainless steel self-tapping screws. 
 This item can only be ordered when ordering any transom trolling kits.
Sale Price  $12.99

Picture
Item # 33-4509
Cord Guide for Lift Kit Cord  
Cord bracket guide mounts to kayak, assists the lift cord by keeping the cord in place. 
Includes two stainless steel self-tapping screws. 
Sale Price  $7.99

kayak batteries
Item # 83699
​35ah  AGM Battery 12volt    Approx. size: 9" x 8" x 6" (may vary slightly by  1" on all side) Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use. Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current.  *Additional battery info Click Here

​Sale Price 
$89.99

Picture
Item # 33-8765
Auto Reset Fuse - Protect your investment with an Auto Reset Fuse. High quality reset circuit breaker. These circuit breakers feature an automatic self reset.
 **Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse.
Sale Price  $19.99

Picture
Item # 88-4324
 35ah AGM Battery & Battery Charger - 
12volt    Approx. size: 9" x 8" x 6" (may vary slightly by  1" on all side) Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use. Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Battery charge for charging AGM & deep cycle batteries.  *Additional battery info Click Here

​Sale Price 
$154.99

Transom Motor Features
Transom Mount with Steering Handle Navigation - for Installing into Power Pole Insert
Easy installation transom mount kits that are dependable and will fit kayak with direct integration for Power Pole systems. Transom Mount trolling motors have been engineered to be installed directly into the Power Pole insert with four stainless screws provided, with no modification to kayak. No unsightly wires, just two flexible cables: one to the remote control box and one to the battery terminals. The motor and shaft are low in profile and compact in size making it easy for removal and storage. Power Pole Sold Separately.
Tilting Feature Allows the Tilting of Motor
We added a remote tilting feature to tilt the motor while sitting in your kayak, which assists in clearing obstacles seen and unseen, at no additional costs.  Since all transom mounts tend to trail lower than the keel of the kayak, in addition to the installation of the Power Pole, the tilting range is limited due the pole.
Telescoping Steering Handle for Easy of Navigation
Our system allows the kayak to steer using the telescoping handle. The steering handle is adjustable to meet the different kayak lengths.  No altering of cables or kayak.  The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware.  We provide stainless steel fasteners to prevent rust. 
Fresh & Saltwater Trolling Motors, 32 lbs, 46 lbs, 55 lbs Thrust of Power Available
We offer several models for fresh water and salt water use, and the Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible 
*Speeds: 5 Speeds Forward / 3 Speeds Reverse, Three Blade Propeller
The motors have a selectors switch, 1-5 speeds forward and 3 reverse. The three blade machete propeller is included with 55lbs trolling motors. The two blade machete propeller are included with 46lbs and 32lb trolling motors. The machete propeller allows for more torque to push the kayak forward in choppy waters or windy conditions, in addition, to cut through weeds and debris with minimal fouling.

Our Transom Power Drive Systems Are Guaranteed

For sales and technical support, call (727) 501-3116

Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.

Picture
Battery Disclaimer  Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries. 
Island Hopper Outboards manufactures accessories to retrofit the numerous kayaks on the market, Island Hopper Outboards accessories are not a Bonafide branded products.
We do not sell or make any claim that these accessories are manufactured by Bonafide.
Product Reviews     Policy and Warranty    Contact Us
© Copyright 2021 Island Hopper Outboards
  • Kayaks by Brand
  • Kayak Transom Motors
  • Kayak Trolling Motors
  • Kayak Trolling Motor Mount
  • Power Pole Transom Motor
  • Gallery
  • Kayak Outriggers & Leaning Post
  • Battery & Charger
  • Kayak Gas Motor Kit
  • DIY Kayak Transom Kits
  • LiFeP04
  • Accessories
  • Home