Kayak Trolling Motors for Hobie Kayaks & Kayak Trolling Motor Mounts For All Hobie Kayaks
  • Kayaks by Brand
  • Kayak Transom Motors
  • Kayak Trolling Motor Mount
  • Power Pole Transom Motor
  • Hobie SpotLock Trolling Motors
  • Motors For 3 Waters Kayaks
  • Battery & Charger
  • Kayak Gas Motor Kit
  • Kayak Trolling Motors
  • DIY Kayak Transom Kits
  • LiFeP04
  • Gallery
  • Parts
    • Spare & Replacement Parts
    • Kayak Outriggers & Leaning Post
Picture
 Kayak Variable Speed Transom Motors for Native Kayaks

For Native Propel Titan, Native Propel Slayer Max & Slayer XC Kayaks With or Without Rudder System

Variable Speed Transom Trolling Motors for Native Kayaks  
Item # 80-07761-VS

Choose Thrust from Menu
Must Choose Navigate Kayak Option
Year, Make & Model of Kayak
Transom Variable Speed Trolling Motor  - Navigate w/ Steering Handle or Navigate w/ Rudder Cables
Item # 80-07761-VS
Includes trolling motor with intergraded circuit board, customized mounting bracket, handheld remote with infinite forward and reverse speed, heavy gauged battery cable, lithium ion plug, motor lifting cord kit and all stainless steel hardware required for installation.  Trolling motors are sealed unbreakable shaft, 12 volts, available in Freshwater (FW) and Salt Water (SW), 46lbs and 55lbs of thrust. Zinc anode on salt water models only. Trolling motor can be purchased alone or with a 60ah LiFePo4 battery and charger, see dropdown.  

Note:  For kayaks without a rudder system, you must order with Navigate w/ Steering Handle Option
Note:  For kayaks with rudder system,  you will remove rudder, leave cables in place, order Navigate w/ Kayaks Rudder Cables Option.  
           
Exception to kayaks that have rudders under the kayak, in this case, you'll receive a steering handle with order.

Battery Type for Use:  LiFeP04 Battery, Deep Cycle, AGM, and Gel Batteries

Customers Who Bought This Item Also Bought
Picture
Item # 33-4567
Remote Mounting Bracket. 
Mounts to kayak, allows remote control to pivot for ease of use. Includes two stainless steel self-tapping screws.  This item can only be ordered when ordering any transom trolling kits.

Sale Price $12.99

Picture
Item # 33-4509
Cord Guide for Lift Kit Cord. 
Cord bracket guide mounts to kayak, assists the lift cord by keeping the cord in place. Includes two stainless steel self-tapping screws.
Sale Price $7.99

Picture
Item # 33-0000
Propeller - Propellers  for 30lbs, 32lbs, 46lbs, 55lbs 56lbs, Thrust.  Keep a spare propeller on board for safety. For Island Hopper Trolling Motors Only
Choose Propeller Size

Understanding Lithium-Ion (LiFePO4) Battery & Their Effect On Conventional Trolling Motors vs Trolling Motors with Intergraded Circuit Board
 LiFePO4 batteries were designed to be light weight and pack more energy.  LiFePO4 batteries were engineered to store as much voltage from solar panels. 
The stored voltage is unregulated and will burnout conventional trolling motors or shorten their lifespan, because the collected volts are too high (+18 volts =
 12.8 - 16.0 volts DC), whereas conventional trolling motors operate on regulated 12 volts.  Therefore, to regulate the LiFePO4 batteries voltage output, a trolling motor requires an intergraded circuit board to control speed and regulate the voltage, along with a heavy gauged battery cable, lithium-ion plug and an auto reset fuse.
 Trolling motors with intergraded circuit board ​tend to have a longer lifespan and extended fishing time while kayaking.   Read More
Variable Speed Trolling Motors 
Are one of the most improved technology today. Boaters and kayakers are gravitating to trolling motors with variable speeds due to their many benefits:
​
Benefits of Variable Speed Include:
- Infinite Speed Range of "0-100 speed forward and reverse", which allows for trolling at very low speeds for hours without affecting any speeds of the motor. 
- A Micro Processer aka (Pulse Width Modulator) to increase battery range 3 to 4 times, allowing for hours of continuous trolling.
- Controlled Amperage provides steady trolling in currents and wind while conserving battery at 95% efficiency.
- Integrated Electronic Board System senses over and undercharge of voltage, eliminates voltage spikes, 95% efficiency in power and torque.
- Soft start: no spooking of fish while trolling and lighter in weight than conventional trolling motors,
​Battery Compatible:  Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Lithium Iron - LiFeP04 Compatible Trolling Motors - For LiFeP04 Battery Use Only ​
These motors are designed to be used with LiFeP04 battery and built with an intergraded circuit board which regulates the voltage and allows speed adjustments in fractional increments, from 1/4 to 5 mph. This motor includes heavy gauged wire, auto reset fuse, lithium-ion plug, which handles 60 to 200 amp LiFePO4 batteries.

For sales and technical support, call (727) 501-3116

Picture
Design, colors and images may differ from actual item
Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.

Picture
Battery Disclaimer  
Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries. 
Product Reviews     Policy and Warranty    Contact Us
© Copyright 2023 Island Hopper Outboards
  • Kayaks by Brand
  • Kayak Transom Motors
  • Kayak Trolling Motor Mount
  • Power Pole Transom Motor
  • Hobie SpotLock Trolling Motors
  • Motors For 3 Waters Kayaks
  • Battery & Charger
  • Kayak Gas Motor Kit
  • Kayak Trolling Motors
  • DIY Kayak Transom Kits
  • LiFeP04
  • Gallery
  • Parts
    • Spare & Replacement Parts
    • Kayak Outriggers & Leaning Post