|
Kayak Transom Motors For Power Pole Ready Kaku Kayaks
|
Rudder Cable Navigating Motor Tilts Out Of Water Steering Handle Navigating
Exclusively Designed For Kaku Kayak or Paddle Board Owner, Who Owns a Power Pole and Want a Transom Mounted Trolling Motor.
Includes mounting plate which screws into Power Poles inserts with four stainless screws provided.
Lifts and Pivots out of water for beaching kayak. Installs within seconds. Power Pole Sold Separately.
Includes mounting plate which screws into Power Poles inserts with four stainless screws provided.
Lifts and Pivots out of water for beaching kayak. Installs within seconds. Power Pole Sold Separately.
Transom Steering Handle Kaku Mount Kits
|
Transom Mount Trolling Motor Steering Handle & Controller
Item # 30-7760-PP Includes trolling motor with customized mounting bracket which will accept Power Pole, hand held remote controller with 5 speeds forward and 3 speeds reverse, telescoping steering handle, motor lifting cord kit with cleat and all stainless steel hardware required for installation. Power Pole not included. Zinc anode on salt water models only. No access hatch or rudder system required |
These transom mount kits are custom made and considered, special order for Kaku Kayaks
|
Transom Surface (Rudder Cable) Kaku Mount Kits
|
Transom Surface Mount Trolling Motor w/ Hand Held Remote Control
Item # 30-2501-PP Includes trolling motor with customized mounting bracket which will accept Power Pole, hand held remote controller with 5 speeds forward and 3 speeds reverse, cable rudder clips, motor lifting cord kit with cleat and all stainless steel hardware required for installation. Power Pole not included. Zinc anode on salt water models only. Surface Mount installs with the included rudder cable clips to existing rudder cables of Kaku kayak. No access hatch required. |
These transom mount kits are custom made and considered, special order for Kaku Kayaks
|
|
Island Hopper Transom Motors for Power Pole ready kayaks, are pre-assembled and ready to install with in moments.
Add your Power Pole to our Transom Mount, which has been designed just for Power Pole. No modification needed to kayak or mounting plate. Just add your Power Pole and a battery, and you'll be on your way to a fun filled day with motorized comfort navigating and anchoring. Includes Lift Kit, which allows the motor to tilt out of water, for eazy beaching. |
Customers Who Bought This Item Also Bought
|
Item # 33-4567
Mounting Bracket for Remote Control Mounts to kayak, allows remote control to pivot for ease of use. Includes two stainless steel self-tapping screws. This item can only be ordered when ordering any transom trolling kits. |
Sale Price
$12.99 |
|
Item # 33-4509
Cord Guide for Lift Kit Cord. Cord bracket guide mounts to kayak, assists the lift cord by keeping the cord in place. Includes two stainless steel self-tapping screws. |
Sale Price
$7.99 |
 |
Item # 83699
35ah AGM Battery 12volt Approx. size: 9" x 8" x 6" (may vary slightly by 1" on all side) Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use. Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. *Additional battery info Click Here |
Sale Price
$89.99 |
|
Item # 33-8765
Protect your investment with an Auto Reset Fuse. High quality reset circuit breaker. These circuit breakers feature an automatic self reset. **Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse. |
Sale Price
$19.99 |
Transom Mount with Navigating Options: Steering Handle Or Foot Pedal Navigation - for Installing into Power Pole Insert
Easy installation transom mount kits that are dependable and will fit kayak brands with direct integration for Power Pole systems with or without rudders. Transom Mount trolling motors have been engineered to be installed directly into the Power Pole insert with four stainless screws provided, with no modification to the Kaku kayak or Paddle Board. No unsightly wires, just two flexible cables: one to the remote control box and one to the battery terminals. The motor and shaft are low in profile and compact in size making it easy for removal and storage. Power Pole Sold Separately.
Easy installation transom mount kits that are dependable and will fit kayak brands with direct integration for Power Pole systems with or without rudders. Transom Mount trolling motors have been engineered to be installed directly into the Power Pole insert with four stainless screws provided, with no modification to the Kaku kayak or Paddle Board. No unsightly wires, just two flexible cables: one to the remote control box and one to the battery terminals. The motor and shaft are low in profile and compact in size making it easy for removal and storage. Power Pole Sold Separately.
Lifting Feature Allows the Lifting of Motor
We added a remote lifting feature to lift the motor while sitting in your kayak, which assists in clearing obstacles seen and unseen, at no additional costs.
Since all transom mounts tend to trail lower than the keel of the kayak making it difficult to navigate in weeded waters, where sea grass, lily pods and debris is floating, as well as, running a ground, beach casting and landing and during portage, this motor lifting feature is perfect and comfortable to operate while seated.
We added a remote lifting feature to lift the motor while sitting in your kayak, which assists in clearing obstacles seen and unseen, at no additional costs.
Since all transom mounts tend to trail lower than the keel of the kayak making it difficult to navigate in weeded waters, where sea grass, lily pods and debris is floating, as well as, running a ground, beach casting and landing and during portage, this motor lifting feature is perfect and comfortable to operate while seated.
Telescoping Steering Handle for Easy of Navigation
Our system allows the kayak to steer using the telescoping handle. The steering handle is adjustable to meet the different kayak lengths. No altering of cables or kayak. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust.
Our system allows the kayak to steer using the telescoping handle. The steering handle is adjustable to meet the different kayak lengths. No altering of cables or kayak. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust.
Fresh & Saltwater Trolling Motors, 32 lbs, 46 lbs, 55 lbs Thrust of Power Available
We offer several models for fresh water and salt water use, and the Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible
We offer several models for fresh water and salt water use, and the Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible
*Speeds: 5 Speeds Forward / 3 Speeds Reverse, Three Bade Propeller
The motors have a selectors switch, 1-5 speeds forward and 3 reverse. The three blade machete propeller is included with 55lbs trolling motors. The two blade machete propeller are included with 46lbs and 32lb trolling motors. The machete propeller allows for more torque to push the kayak forward in choppy waters or windy conditions, in addition, to cut through weeds and debris with minimal fouling.
The motors have a selectors switch, 1-5 speeds forward and 3 reverse. The three blade machete propeller is included with 55lbs trolling motors. The two blade machete propeller are included with 46lbs and 32lb trolling motors. The machete propeller allows for more torque to push the kayak forward in choppy waters or windy conditions, in addition, to cut through weeds and debris with minimal fouling.
Our Transom Power Drive Systems Are Guaranteed
|
Other Stern, Rear, Transom Kayak Trolling Motor Kits Click Here
|
.
|
For sales and technical support, call (727) 501-3116
Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.
|
Battery Disclaimer Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries.
|