Island Hopper Conventional Trolling Motors for Pelican Catch HyDryve Kayaks
|
|
Island Hopper Conventional Trolling Motor for Pelican Catch 130 HyDryve
Item # 24-8400 Includes sealed trolling motor with customized retrofitted cassette, remote controller with 5 speeds forward & 2 speeds reverse, customized propeller. Slips into pedal drive and locks with kayaks latches. Trolling motors are sealed unbreakable shaft, 12 volts, available in Freshwater (FW) and Salt Water (SW), 30lbs and 46lbs of thrust. Zinc anode on salt water models only. Rudder system required Battery Type: Deep Cycle Marine, AGM & Gel Batteries Only Note: Remote control is hand held. (Optional Remote Control Mounting Bracket Sold Separately) |
|
Optional Spare
|
Auto Reset Fuse
$19.99 |
Remote Bracket
$12.99 |
Aluminum Propeller
$124.99 |
35AH AGM Battery
$99.99 |
Island Hopper Trolling Motor for
Pelican HyDryve Kayaks |
How To Insert Trolling Motor
|
Low Profile of Island Hopper Trolling Motor for Pelican HyDryve Kayak
|
Design, colors and images may differ from actual item. Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.
Conventional Trolling Motors
Are the most commonly used motor for boating and kayaking. They are cost affective and are equipped with 5 forward / 2 reverse speeds. They are primarily designed to propel you quickly to your desired destination or fishing hole, and then reposition your boat or kayak when currents or wind blow you off course.
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
Are the most commonly used motor for boating and kayaking. They are cost affective and are equipped with 5 forward / 2 reverse speeds. They are primarily designed to propel you quickly to your desired destination or fishing hole, and then reposition your boat or kayak when currents or wind blow you off course.
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
For sales and technical support, call (727) 501-3116
Kayak Motors - Pelican Catch 130 & 110HD II HyDryve
|
Battery Disclaimer Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries. Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use. Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Additional battery info click here
|
Island Hopper Outboards manufactures accessories to retrofit the numerous kayaks on the market, Island Hopper Outboards accessories are not a Pelican branded products.
We do not sell or make any claim that these accessories are manufactured by Pelican.
We do not sell or make any claim that these accessories are manufactured by Pelican.