|
|
Kayak Motor Mounts and Conventional Trolling Motors for Vibe Kayaks
Designed to fit Vibe Kayaks, Sea Ghost 110 & 130 Angler, Skipjack 90 &120T Tandem and Yellowfin 110 & 130T kayaks with built-in Rods Holders.
Easily slips into your existing kayak rod holders without the need to drill holes in your kayak. Installs within seconds and removes within seconds. Assembly required.
Island Hopper Kayak Motor Mount for handles up to a 55lb thrust of power.
Best of all, use your trolling motor or our exclusively designed short shaft waterproof sealed kayak trolling motors.
Designed to fit Vibe Kayaks, Sea Ghost 110 & 130 Angler, Skipjack 90 &120T Tandem and Yellowfin 110 & 130T kayaks with built-in Rods Holders.
Easily slips into your existing kayak rod holders without the need to drill holes in your kayak. Installs within seconds and removes within seconds. Assembly required.
Island Hopper Kayak Motor Mount for handles up to a 55lb thrust of power.
Best of all, use your trolling motor or our exclusively designed short shaft waterproof sealed kayak trolling motors.
Kayak Side Motor Mount with Ballast (Counter-Weight) and Kayak Trolling Motors for Vibe Kayaks
Item # 55-4221
Item # 55-4221
Vibe Kayak side Mount with Ballast
|
Vibe Kayak side Mount with Ballast
|
|
|
Vibe Kayak side Mount with Ballast
|
Vibe Kayak Side Mount w/ Ballast Includes: Item # 55-4421
Aluminum Cross-Bars, Kayak Specific Downtubes, Ballast (Counter-Weight) and Stainless Steel Hardware.
Ballast acts as a counter-weight to the trolling motor. Ballast provides balancing, so you do not need to shift your weight away from the motors side. Installation Instructions Click Here
Can Also Be Purchased With A Kayak Trolling Motor.
Trolling Motors Are Sealed Unbreakable Short Shaft, 12 Volts with Built-In Battery Indicator, 5 Position Adjustable Mount, Weedless Machete Propeller (55 lb. Models Only), 2 Blade Propeller (32 lb. & 46 lb. Models Only),Zinc Anode (Salt Water Models Only), Salt Water (SW) & Fresh Water (FW) usage, Fits 26"-34" Wide Kayaks.
Aluminum Cross-Bars, Kayak Specific Downtubes, Ballast (Counter-Weight) and Stainless Steel Hardware.
Ballast acts as a counter-weight to the trolling motor. Ballast provides balancing, so you do not need to shift your weight away from the motors side. Installation Instructions Click Here
Can Also Be Purchased With A Kayak Trolling Motor.
Trolling Motors Are Sealed Unbreakable Short Shaft, 12 Volts with Built-In Battery Indicator, 5 Position Adjustable Mount, Weedless Machete Propeller (55 lb. Models Only), 2 Blade Propeller (32 lb. & 46 lb. Models Only),Zinc Anode (Salt Water Models Only), Salt Water (SW) & Fresh Water (FW) usage, Fits 26"-34" Wide Kayaks.
Kayak Side Motor Mount with Net Holder and Kayak Trolling Motors for Vibe Kayaks
Item # 55-2280
Item # 55-2280
Kayak Side Motor Mount with Net Holder
|
Kayak Side Motor Mount with Net Holder
|
|
|
Kayak Side Motor Mount with Net Holder
|
Vibe Kayak Side Mount Includes: Item # 55-2280
Aluminum Cross-Bars, Kayak Specific Downtubes, Net Holder and Stainless Steel Hardware.
Can Also Be Purchased With A Kayak Trolling Motor.
Trolling Motors Are Sealed Unbreakable Short Shaft, 12 Volts with Built-In Battery Indicator, 5 Position Adjustable Mount, Weedless Machete Propeller (55 lb. Models Only), 2 Blade Propeller (32 lb. & 46 lb. Models Only), Zinc Anode (Salt Water Models Only), Salt Water (SW) & Fresh Water (FW) usage, Fits 26"-34" Wide Kayaks
Aluminum Cross-Bars, Kayak Specific Downtubes, Net Holder and Stainless Steel Hardware.
Can Also Be Purchased With A Kayak Trolling Motor.
Trolling Motors Are Sealed Unbreakable Short Shaft, 12 Volts with Built-In Battery Indicator, 5 Position Adjustable Mount, Weedless Machete Propeller (55 lb. Models Only), 2 Blade Propeller (32 lb. & 46 lb. Models Only), Zinc Anode (Salt Water Models Only), Salt Water (SW) & Fresh Water (FW) usage, Fits 26"-34" Wide Kayaks
Kayak Trolling Motors and Kayak Motor Mount guaranteed to fit your specific kayak.
The Kayak Motor Mount you order will be kayak specific.
The Kayak Motor Mount you order will be kayak specific.
**Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse**
Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use.
Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Additional battery info click here
Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use.
Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Additional battery info click here
Customers Who Viewed This Item Ultimately Bought
|
35ah AGM Battery & Battery Charger Item # 88-4324
35ah AGM Battery - 12volt Approx. size: 9" x 8" x 6" (may vary slightly by 1" on all side) Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use. Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Battery charge for charging AGM & deep cycle batteries. *Additional battery info Click Here |
Sale Price $174.99
|
|
Item # 33-8765
Auto Reset Fuse Protect your investment with an Auto Reset Fuse. High quality reset circuit breaker. These circuit breakers feature an automatic self reset. **Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse. |
Sale Price $24.99
|
Conventional Trolling Motors
Are the most commonly used motor for boating and kayaking. They are cost affective and are equipped with 5 forward / 2 reverse speeds. They are primarily designed to propel you quickly to your desired destination or fishing hole, and then reposition your boat or kayak when currents or wind blow you off course.
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
Are the most commonly used motor for boating and kayaking. They are cost affective and are equipped with 5 forward / 2 reverse speeds. They are primarily designed to propel you quickly to your desired destination or fishing hole, and then reposition your boat or kayak when currents or wind blow you off course.
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
For sales and technical support, call (727) 501-3116
Vibe Kayak Motor Mount Series for All Trolling Motors
|
Battery Disclaimer Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries.
|