|
Kayak Transom Motors For Power Pole Ready Bonafide Kayaks
|
|
Exclusively Designed For the Bonafide Kayak with a Power Pole ready kayak, Who Owns a Power Pole and Want a Transom Mounted Trolling Motor.
Includes mounting plate which screws into Power Poles inserts with four stainless screws provided. Installs within seconds. Remove slip pin for quick removal and storage. Power Pole Sold Separately. |
Transom Steering Handle Mount Kits
|
Transom Mount Trolling Motor Steering Handle & Controller
Item # 102-7760-PP Includes trolling motor with customized mounting bracket which will accept Power Pole, hand held remote controller with 5 speeds forward and 3 speeds reverse, telescoping steering handle, motor tilting cord kit with cleat, slip pin for quick removal and storage, and all stainless steel hardware required for installation. Power Pole not included. Zinc anode on salt water models only. No access hatch or rudder system required These transom mount kits are custom made and considered, special order for Bonafide Power Pole Ready Kayaks
|
|
Lithium-Ion Battery Information:
Customers who plan on using Lithium-Ion Batteries, must upgrade to a Lithium-Ion Plug and 60 or 80 Amp Fuse. Read More
Customers who plan on using Lithium-Ion Batteries, must upgrade to a Lithium-Ion Plug and 60 or 80 Amp Fuse. Read More
|
Island Hopper Transom Motors for Power Pole ready kayaks, are pre-assembled and ready to install with in moments.
Add your Power Pole to our Transom Mount, which has been designed just for Power Pole. No modification needed to kayak or mounting plate. Just add your Power Pole and a battery, and you'll be on your way to a fun filled day with motorized comfort navigating and anchoring. Includes kit, which allows the motor to tilt for easy beaching. (tilting range is limited due the pole) |
|
|
Island Hopper Transom Motors for Power Pole ready kayaks, is guaranteed to fit: Bonafide SS127 |
Customers Who Bought This Item Also Bought
|
Item # 33-4567
Mounting Bracket for Remote Control Mounts to kayak, allows remote control to pivot for ease of use. Includes two stainless steel self-tapping screws. This item can only be ordered when ordering any transom trolling kits. |
Sale Price
$12.99 |
|
Item # 33-4509
Cord Guide for Lift Kit Cord. Cord bracket guide mounts to kayak, assists the lift cord by keeping the cord in place. Includes two stainless steel self-tapping screws. |
Sale Price
$7.99 |
 |
Item # 83699
35ah AGM Battery 12volt Approx. size: 9" x 8" x 6" (may vary slightly by 1" on all side) Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use. Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. *Additional battery info Click Here |
Sale Price
$89.99 |
|
Item # 33-8765
Protect your investment with an Auto Reset Fuse. High quality reset circuit breaker. These circuit breakers feature an automatic self reset. **Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse. |
Sale Price
$19.99 |
|
Item # 88-4324
Battery & Charger Add a Battery & Battery Charger Choose a AGM / Deep Cycle or Lithium ion / Lifepo4 Battery Charger with a 35ah AGM Sealed Battery |
|
Transom Mount with Steering Handle Navigation - for Installing into Power Pole Insert
Easy installation transom mount kits that are dependable and will fit kayak with direct integration for Power Pole systems. Transom Mount trolling motors have been engineered to be installed directly into the Power Pole insert with four stainless screws provided, with no modification to kayak. No unsightly wires, just two flexible cables: one to the remote control box and one to the battery terminals. The motor and shaft are low in profile and compact in size making it easy for removal and storage. Power Pole Sold Separately.
Easy installation transom mount kits that are dependable and will fit kayak with direct integration for Power Pole systems. Transom Mount trolling motors have been engineered to be installed directly into the Power Pole insert with four stainless screws provided, with no modification to kayak. No unsightly wires, just two flexible cables: one to the remote control box and one to the battery terminals. The motor and shaft are low in profile and compact in size making it easy for removal and storage. Power Pole Sold Separately.
Tilting Feature Allows the Tilting of Motor
We added a remote tilting feature to tilt the motor while sitting in your kayak, which assists in clearing obstacles seen and unseen, at no additional costs.
Since all transom mounts tend to trail lower than the keel of the kayak, in addition to the installation of the Power Pole, the tilting range is limited due the pole.
We added a remote tilting feature to tilt the motor while sitting in your kayak, which assists in clearing obstacles seen and unseen, at no additional costs.
Since all transom mounts tend to trail lower than the keel of the kayak, in addition to the installation of the Power Pole, the tilting range is limited due the pole.
Telescoping Steering Handle for Easy of Navigation
Our system allows the kayak to steer using the telescoping handle. The steering handle is adjustable to meet the different kayak lengths. No altering of cables or kayak. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust.
Our system allows the kayak to steer using the telescoping handle. The steering handle is adjustable to meet the different kayak lengths. No altering of cables or kayak. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust.
Fresh & Saltwater Trolling Motors, 32 lbs, 46 lbs, 55 lbs Thrust of Power Available
We offer several models for fresh water and salt water use, and the Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible
We offer several models for fresh water and salt water use, and the Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible
*Speeds: 5 Speeds Forward / 3 Speeds Reverse, Three Bade Propeller
The motors have a selectors switch, 1-5 speeds forward and 3 reverse. The three blade machete propeller is included with 55lbs trolling motors. The two blade machete propeller are included with 46lbs and 32lb trolling motors. The machete propeller allows for more torque to push the kayak forward in choppy waters or windy conditions, in addition, to cut through weeds and debris with minimal fouling.
The motors have a selectors switch, 1-5 speeds forward and 3 reverse. The three blade machete propeller is included with 55lbs trolling motors. The two blade machete propeller are included with 46lbs and 32lb trolling motors. The machete propeller allows for more torque to push the kayak forward in choppy waters or windy conditions, in addition, to cut through weeds and debris with minimal fouling.
Our Transom Power Drive Systems Are Guaranteed
For sales and technical support, call (727) 501-3116
Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.
|
Battery Disclaimer Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries.
|