Conventional BeaverTail Kayak Trolling Motors for FeelFree Moken and Dorado Kayaks
Beavertail Trolling Motor on a FeelFree Kayak
Island Hopper latest edition trolling motor is designed specifically to fit Moken and Dorado kayak made by Feel Free. The Island Hopper BeaverTail Rudder Trolling Motor installs quickly in place of the beaver tail rudder without any modification. Island Hopper Transom Motors are another great design unparalleled by any other kayak trolling motor design.
Lifts and Pivots out of water for beaching kayak.
Lifts and Pivots out of water for beaching kayak.
Island Hopper Remote Control BeaverTail Conventional Trolling Motor for FeelFree Moken & Dorado Kayaks
Item # 68-3420
Item # 68-3420
|
|
|
Island Hopper Remote Control BeaverTail Conventional Trolling Motor for FeelFree Moken & Dorado Kayaks
Item # 68-3420
Includes conventional sealed trolling motor with customized retrofitted mounting bracket, remote controller w/ 5 speeds forward & 3 speeds reverse, motor lifting cord kit with cleat, propeller, unbreakable shaft, and all stainless steel hardware required for installation. 12 volts. Slips in for quick and easy install. Trolling motors are sealed unbreakable shaft, 12 volts, available in Freshwater (FW) and Salt Water (SW), 32lbs, 46lbs and 55lbs of thrust. Zinc anode on salt water models only.
Note: For kayaks without a rudder system, you must order with Navigate w/ Steering Handle Option
Note: For kayaks with rudder system, you will remove rudder, but leave cables in place, and order Navigate w/ Kayaks Rudder Cables Option
Battery Type: Deep Cycle Marine, AGM & Gel Batteries Only
Remote control is hand held. (Optional Mounting Bracket Sold Separately) (See Below)
Item # 68-3420
Includes conventional sealed trolling motor with customized retrofitted mounting bracket, remote controller w/ 5 speeds forward & 3 speeds reverse, motor lifting cord kit with cleat, propeller, unbreakable shaft, and all stainless steel hardware required for installation. 12 volts. Slips in for quick and easy install. Trolling motors are sealed unbreakable shaft, 12 volts, available in Freshwater (FW) and Salt Water (SW), 32lbs, 46lbs and 55lbs of thrust. Zinc anode on salt water models only.
Note: For kayaks without a rudder system, you must order with Navigate w/ Steering Handle Option
Note: For kayaks with rudder system, you will remove rudder, but leave cables in place, and order Navigate w/ Kayaks Rudder Cables Option
Battery Type: Deep Cycle Marine, AGM & Gel Batteries Only
Remote control is hand held. (Optional Mounting Bracket Sold Separately) (See Below)
**Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse**
Customers Who Bought This Item Also Bought
|
Item # 33-4567
Mounting Bracket for Remote Control. Mounts to kayak, allows remote control to pivot for ease of use. Includes two stainless steel self-tapping screws. This item can only be ordered when ordering any transom trolling kits. |
Sale Price $12.99
|
 |
Item # 83699
35ah AGM Battery 12volt Approx. size: 9" x 8" x 6" (may vary slightly by 1" on all side) Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use. Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. *Additional battery info Click Here |
Sale Price $99.99
|
|
Item # 33-8765
Protect your investment with an Auto Reset Fuse. High quality reset circuit breaker. These circuit breakers feature an automatic self reset. |
Sale Price $19.99
|
|
Item # 88-4324
35ah AGM Battery & Battery Charger - 12volt Approx. size: 9" x 8" x 6" (may vary slightly by 1" on all side) Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use. Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Battery charge for charging AGM & deep cycle batteries. *Additional battery info Click Here |
Sale Price $154.99
|
BeaverTail Kayak Trolling Motors Fit FeelFree Line
|
|
|
|
Introducing BeaverTail Rudder Motor
Island Hopper latest edition trolling motor designed specifically to fit FeelFree Moken & Dorado kayaks.
The Island Hopper BeaverTail Rudder Trolling Motor installs quickly in place of the beavertail rudder without any modification.
Trolling motor comes with a built-in oversized rudder, designed to increase the turning radius of the kayak. Offers improved steering to compensate for kayak size,
in addition, the built-in rudder allows for better handling and control in choppy water, current and wind, increases kayak stability, and save battery consumption.
Even without motor propulsion, the oversized Beaver Tail rudder motor will significantly improve steering while pedaling.
Lifts and Pivots out of water for beaching kayak. Installs and removal is made easy using quick release slip pin
Available for foot pedal rudder steering or tiller handle steering .
Available thrusts: 46 lbs. and 55 lbs. of thrust, freshwater and saltwater, compatible with Moken & Dorado kayaks.
Island Hopper latest edition trolling motor designed specifically to fit FeelFree Moken & Dorado kayaks.
The Island Hopper BeaverTail Rudder Trolling Motor installs quickly in place of the beavertail rudder without any modification.
Trolling motor comes with a built-in oversized rudder, designed to increase the turning radius of the kayak. Offers improved steering to compensate for kayak size,
in addition, the built-in rudder allows for better handling and control in choppy water, current and wind, increases kayak stability, and save battery consumption.
Even without motor propulsion, the oversized Beaver Tail rudder motor will significantly improve steering while pedaling.
Lifts and Pivots out of water for beaching kayak. Installs and removal is made easy using quick release slip pin
Available for foot pedal rudder steering or tiller handle steering .
Available thrusts: 46 lbs. and 55 lbs. of thrust, freshwater and saltwater, compatible with Moken & Dorado kayaks.
Understanding Lithium-Ion (LiFePO4) Battery & Their Effect On Conventional Trolling Motors vs Trolling Motors with Intergraded Circuit Board
LiFePO4 batteries were designed to be light weight and pack more energy. LiFePO4 batteries were engineered to store as much voltage from solar panels.
The stored voltage is unregulated and will burnout conventional trolling motors or shorten their lifespan, because the collected volts are too high (+18 volts = 12.8 - 16.0 volts DC), whereas conventional trolling motors operate on regulated 12 volts. Therefore, to regulate the LiFePO4 batteries voltage output, a trolling motor requires an intergraded circuit board to control speed and regulate the voltage, along with a heavy gauged battery cable, lithium-ion plug, and auto reset fuse.
Trolling motors with intergraded circuit board tend to have a longer lifespan and extended fishing time while kayaking. Read More
LiFePO4 batteries were designed to be light weight and pack more energy. LiFePO4 batteries were engineered to store as much voltage from solar panels.
The stored voltage is unregulated and will burnout conventional trolling motors or shorten their lifespan, because the collected volts are too high (+18 volts = 12.8 - 16.0 volts DC), whereas conventional trolling motors operate on regulated 12 volts. Therefore, to regulate the LiFePO4 batteries voltage output, a trolling motor requires an intergraded circuit board to control speed and regulate the voltage, along with a heavy gauged battery cable, lithium-ion plug, and auto reset fuse.
Trolling motors with intergraded circuit board tend to have a longer lifespan and extended fishing time while kayaking. Read More
Conventional Trolling Motors are the most commonly used motor for boating and kayaking. They are cost affective and are equipped with 5 forward / 2 reverse speeds. They are primarily designed to propel you quickly to your desired destination or fishing hole, and then reposition your boat or kayak when currents or wind blow you off course.
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a backup battery for longer range use.
Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Additional battery info click here
Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Additional battery info click here
|
Battery Disclaimer Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries.
|
Island Hopper Outboards manufactures accessories to retrofit the numerous kayaks on the market, Island Hopper Outboards accessories are not a FeelFree Kayak branded products.
We do not sell or make any claim that these accessories are manufactured by FeelFree Kayaks
We do not sell or make any claim that these accessories are manufactured by FeelFree Kayaks