Kayak Motors that Fit Riot Fishing Kayak Mako 10, 12, 14. |
Island Hopper Conventional and Variable Speed Riot Drive Kayak Trolling Motor Fits Riot Mako 10 & 12 - 46lb. Thrust Saltwater Drive Trolling Motor on Riot Mako 12
|
Island Hopper Conventional Trolling Motor for Riot Mako Item # 65-8400
Includes sealed conventional trolling motor for Riot kayak with customized retrofitted cassette, remote controller with 5 speeds forward & 2 speeds reverse, customized propeller. Slips into pedal drive and locks with kayaks latches. Trolling motors are sealed unbreakable shaft, 12 volts, available in Freshwater (FW) and Salt Water (SW), 30lbs and 46lbs of thrust. Zinc anode on salt water models only. Rudder system required
Battery Type: Deep Cycle Marine, AGM & Gel Batteries Only
Note: Remote control is hand held. (Optional Remote Control Mounting Bracket Sold Separately)
Battery Type: Deep Cycle Marine, AGM & Gel Batteries Only
Note: Remote control is hand held. (Optional Remote Control Mounting Bracket Sold Separately)
Island Hopper Variable Speed Trolling Motor for Riot Mako Kayak Item # 65-08400-VS
Includes variable speed sealed trolling motor with intergraded circuit board, customized retrofitted cassette for Riot kayak, handheld remote with infinite forward and reverse speed, heavy gauged battery cable, lithium ion plug, customized propeller and zinc anode. Slips into pedal drive and locks with kayaks latches. Rudder system required.
Battery Type: LiFeP04, Deep Cycle, AGM & Gel Batteries.
Note: Remote control is hand held. (Optional Mounting Bracket Sold Separately) (See Below)
Battery Type: LiFeP04, Deep Cycle, AGM & Gel Batteries.
Note: Remote control is hand held. (Optional Mounting Bracket Sold Separately) (See Below)
Optional Spare Parts & Accessories
|
Remote Bracket
$12.99 |
Riot Propeller
$124.99 |
35AH AGM Battery
$99.99 |
Insert Riot Mako motor into drive well. Lock with cam locks. Attach trolling motor battery cables to battery terminals. You are ready to go fishing.
Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current.
Design, colors and images may differ from actual item and various kayak models.
Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.
*Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a by a manually reset, trip-free circuit breaker or fuse.
Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current.
Design, colors and images may differ from actual item and various kayak models.
Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.
*Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a by a manually reset, trip-free circuit breaker or fuse.
Understanding Kayak Trolling Motors and Batteries
Conventional Trolling Motors
Are the most commonly used motor for boating and kayaking. They are cost affective and are equipped with 5 forward / 2 reverse speeds. They are primarily designed to propel you quickly to your desired destination or fishing hole, and then reposition your boat or kayak when currents or wind blow you off course.
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
Conventional Trolling Motors
Are the most commonly used motor for boating and kayaking. They are cost affective and are equipped with 5 forward / 2 reverse speeds. They are primarily designed to propel you quickly to your desired destination or fishing hole, and then reposition your boat or kayak when currents or wind blow you off course.
Understanding Conventional Speeds:
- 1st and 2nd speeds are designed for “short bursts” only, not to exceed 15 minutes intervals at a time. "Not for trolling", as it will damage these two speeds.
- 3rd speed is for covering larger areas, traveling and mostly getting around while conserving battery.
- 4th speed is for traveling longer distances faster.
- 5th speed is for when speed is required, such as a change in the weather, current, chop waters or an emergency; getting to safety or shore quickly.
Battery Compatibility: Deep Cycle Marine, AGM and GEL batteries. Conventional trolling motors are Not compatible with Lithium-Ion / LiFePO4 batteries
Variable Speed Trolling Motors
Are one of the most improved technology today. Boaters and kayakers are gravitating to trolling motors with variable speeds due to their many benefits,
Benefits of Variable Speed Include:
- Infinite Speed Range of "0-100 speed forward and reverse", which allows for trolling at very low speeds for hours without affecting any speeds of the motor.
- A Micro Processer aka (Pulse Width Modulator) to increase battery range 3 to 4 times, allowing for hours of continuous trolling.
- Controlled Amperage provides steady trolling in currents and wind while conserving battery at 95% efficiency.
- Integrated Electronic Board System senses over and undercharge of voltage, eliminates voltage spikes, 95% efficiency in power and torque.
- Soft start: no spooking of fish while trolling and lighter in weight than conventional trolling motors,
Battery Compatible: Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Are one of the most improved technology today. Boaters and kayakers are gravitating to trolling motors with variable speeds due to their many benefits,
Benefits of Variable Speed Include:
- Infinite Speed Range of "0-100 speed forward and reverse", which allows for trolling at very low speeds for hours without affecting any speeds of the motor.
- A Micro Processer aka (Pulse Width Modulator) to increase battery range 3 to 4 times, allowing for hours of continuous trolling.
- Controlled Amperage provides steady trolling in currents and wind while conserving battery at 95% efficiency.
- Integrated Electronic Board System senses over and undercharge of voltage, eliminates voltage spikes, 95% efficiency in power and torque.
- Soft start: no spooking of fish while trolling and lighter in weight than conventional trolling motors,
Battery Compatible: Lithium-Ion / LiFePO4, Deep Cycle Marine, AGM and GEL batteries.
Design, colors and images may differ from actual item. Remote Controllers are IP54 and Trolling Motor are IP64: Splash Proof, Not Submersible.
|
Battery Disclaimer Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries. Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use. Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Additional battery info click here
|
Island Hopper Outboards manufactures accessories to retrofit the numerous kayaks on the market, Island Hopper Outboards accessories are not a Riot branded products.
We do not sell or make any claim that these accessories are manufactured by Riot.
We do not sell or make any claim that these accessories are manufactured by Riot.