Transom Mount Trolling Motor 55 lb Thrust on FeelFree Lure II
Attaches to Rudder Cables for Navigating with Foot Pedals
|
FeelFree Lure Transom Trolling Motor - Island Hopper
Kayak Trolling Motors Transom Mount for Kayaks with Rudders. Navigate With Foot Pedals for FeelFree Lure & Moken
Kayak transom trolling motor for FeelFree kayaks and FeelFree Lure Kayaks, offering ultimate power in speed and performance for all kayaks. Available with saltwater & freshwater models 30 lbs. 46 lbs. 55 lbs. of thrust. Features: Assembled water sealed trolling motor, foot steering using rudder cable, fast installation, and lift kit.
|
Transom Surface Mount Kits
|
Transom Surface Mount Trolling Motor w/ Hand Held Remote Control
Surface Mount Cable Installation on top/outside of kayak. Includes trolling motor with customized mounting bracket, remote controller with 5 speeds forward and 3 speeds reverse, motor lifting cord kit with cleat and all stainless steel hardware required for installation. This installation requires the screwing the mount to kayak. If track installation is preferred, you'll need to add to your order item # 33-5870 (below) Zinc anode on salt water models only. Note: Remote control is hand held. No access hatch or rudder system required |
Item # 68-2500
Lure II. Lure 10, Lure 11.5, Moken 10 Lite, Moken 10 Standard, Moken 12.5 Angler, Move Angler |
Item # 68-6600
Lure 13.5 and Moken 14.5 & 14 |
Lithium-Ion Battery Information:
Customers who plan on using Lithium-Ion Batteries, must upgrade to a Lithium-Ion Plug and 60 or 80 Amp Fuse. Read More
Customers who plan on using Lithium-Ion Batteries, must upgrade to a Lithium-Ion Plug and 60 or 80 Amp Fuse. Read More
Transom Surface Mount Trolling Motor w/ Hand Held Remote Control &
35 AGM Sealed Battery Surface Mount Cable Installation on top/outside of kayak. Includes trolling motor with customized mounting bracket, remote controller with 5 speeds forward and 3 speeds reverse, motor lifting cord kit with cleat and all stainless steel hardware required for installation and 35ah AGM sealed battery This installation requires the screwing the mount to kayak. If track installation is preferred, you'll need to add to your order item # 33-5870 (below) Zinc anode on salt water models only. Note: Remote control is hand held. No access hatch or rudder system required |
Item # 68-2521
Lure II, Lure 10, Lure 11.5, Moken 10 Lite, Moken 10 Standard, Moken 12.5 Angler, Move Angler |
Item # 68-2135
Lure 13.5 and Moken 14.5 & 14 |
|
NEW for 2019
Models are now available with Variable Speed Controller. Click Here |
|
IItem # 33-5870 (Optional) These must be ordered to mount in FeelFree Lure & Moken Track System
Universal Track Mounting Clips for FeelFree and Moken kayaks with track system. Island Hopper Transom Mount Trolling motors can be installed into FeelFree and Moken track, instead of installing directly into kayak. Track Clips are factory installed onto cross-bar when ordering transom trollings. These track clips slip into kayaks track and Transom Kit mounts onto track. |
Universal Track Clips
Sale Price $14.99
|
Trolling motors require a 12v battery to operate. Depending on the pounds of thrust of the motor you choose, you may require a back up battery for longer range use.
Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Additional battery info click here
**Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse.
Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible.
Battery range will vary due to size, weight and type of kayak in addition to kayaks load, wind and current. Additional battery info click here
**Coast Guard requirements dictate that each ungrounded current-carrying conductor must be protected by a manually reset, trip-free circuit breaker or fuse.
Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible.
Customers Who Bought This Item Also Bought
|
Item # 33-4567
Mounting Bracket for Remote Control. Mounts to kayak, allows remote control to pivot for ease of use. Includes two stainless steel self-tapping screws. This item can only be ordered when ordering any transom trolling kits. |
Sale Price
$12.99 |
.
|
Item # 33-4509
Cord Guide for Lift Kit Cord. Cord bracket guide mounts to kayak, assists the lift cord by keeping the cord in place. Includes two stainless steel self-tapping screws. |
Sale Price
$7.99 |
|
Item # 33-0000
These Propellers will ONLY fit Island Hopper Trolling Motors. Propellers for Trolling Motors: 30lbs Thrust, 32lbs Thrust, 46lbs Thrust, 55lbs Thrust, 56lbs Thrust |
|
 |
Item # 83619
35ah / 12 volt AGM Battery Info 4 hours at 1st / 2nd speed, 3 hours at 3rd speed, 1.25 hours at 5th speed Based on a 30 lb Thrust Trolling Motor. Times will be shorter with higher thrust power. Approx. size: 9" x 8" x 6" (may vary slightly by 1" on all side) |
|
|
Item # 88-4324
Battery & Charger Add a Battery & Battery Charger Choose a AGM / Deep Cycle or Lithium ion / Lifepo4 Battery Charger with a 35ah AGM Sealed Battery |
|
Years ago kayaks were built for the sport of kayaking. As the sport evolved to kayak fishing we have developed a side mount kayak motor mount with a short shaft kayak trolling trolling motor to help anglers cover more fishing grounds unabated by wind and current. As the market grew so did the demand for alternative means of motorizing kayaks varying from simple to more complex. In response to these demands, we've developed easy installation transom mount kits that are dependable and will fit new and older kayaks with existing rudders.
Transom Mount Trolling Motor Features
Lifting Feature Allows the Lifting of Motor
All transom mounts tend to trail lower than the keel of the kayak making it difficult to navigate in weeded waters, where sea grass, lily pods and debris is floating, as well as, running a ground, beach casting and landing and during portage. To resolve this issue we added a remote lifting feature to lift the motor while, sitting in your kayak and clear obstacles.
Assembled for Easy Installation
Transom motor mount has been engineered to attach to a kayak with four stainless screws, eliminating any cut outs to the hull and any access hatches. No unsightly wires, just two flexible cables: one to the remote control box and one to the battery terminals.
Sleek, Compact, Light Weight
The motor and shaft are low in profile and compact in size making it easy for removal and storage.
Lifting Feature Allows the Lifting of Motor
All transom mounts tend to trail lower than the keel of the kayak making it difficult to navigate in weeded waters, where sea grass, lily pods and debris is floating, as well as, running a ground, beach casting and landing and during portage. To resolve this issue we added a remote lifting feature to lift the motor while, sitting in your kayak and clear obstacles.
Assembled for Easy Installation
Transom motor mount has been engineered to attach to a kayak with four stainless screws, eliminating any cut outs to the hull and any access hatches. No unsightly wires, just two flexible cables: one to the remote control box and one to the battery terminals.
Sleek, Compact, Light Weight
The motor and shaft are low in profile and compact in size making it easy for removal and storage.
Telescoping Steering Handle
Our system allows the kayak to steer using the telescoping handle. The steering handle is adjustable to meet the different kayak lengths. No altering of cables or kayak. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust.
.
Hands Free Operation
Our system allows the kayak to use your existing rudder cables to attach to the transom trolling motor within moments. No altering of cables or kayak. Using the existing rudder pedals allows steering of kayak.
Note: Removal of existing rudder necessary.
Fresh & Saltwater Trolling Motors, 32 lbs, 46 lbs, 55 lbs Thrust of Power Available
We offer several models for fresh water and salt water use, and Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible.
*Speeds: 5 Speeds Forward / 3 Speeds Reverse, Propeller
The motors have a selectors switch, 1-5 speeds forward and 3 reverse. The three blade machete propeller is included with 55lbs trolling motors. The two blade machete propeller are included with 32lb and 46lbs trolling motors. The machete propeller allows for more torque to push the kayak forward in choppy waters or windy conditions, in addition, to cut through weeds and debris with minimal fouling. Remote Controllers are IP54, splash proof not submersible
* Optional - Motors can be ordered with a variable speed controller. Click Here for more information
Our system allows the kayak to steer using the telescoping handle. The steering handle is adjustable to meet the different kayak lengths. No altering of cables or kayak. The transom mounts are made from durable polypropylene composite for marine application, aluminum and stainless steel hardware. We provide stainless steel fasteners to prevent rust.
.
Hands Free Operation
Our system allows the kayak to use your existing rudder cables to attach to the transom trolling motor within moments. No altering of cables or kayak. Using the existing rudder pedals allows steering of kayak.
Note: Removal of existing rudder necessary.
Fresh & Saltwater Trolling Motors, 32 lbs, 46 lbs, 55 lbs Thrust of Power Available
We offer several models for fresh water and salt water use, and Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible.
*Speeds: 5 Speeds Forward / 3 Speeds Reverse, Propeller
The motors have a selectors switch, 1-5 speeds forward and 3 reverse. The three blade machete propeller is included with 55lbs trolling motors. The two blade machete propeller are included with 32lb and 46lbs trolling motors. The machete propeller allows for more torque to push the kayak forward in choppy waters or windy conditions, in addition, to cut through weeds and debris with minimal fouling. Remote Controllers are IP54, splash proof not submersible
* Optional - Motors can be ordered with a variable speed controller. Click Here for more information
|
|
|
Our Transom Mount Systems Are Guaranteed
For sales and technical support, call (727) 501-3116
Design, colors and images may differ from actual item
Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible.
Remote Controllers are IP54 and Trolling Motors are IP64: Splash Proof, Not Submersible.
|
Battery Disclaimer Island Hopper Outboards is not responsible for the performance of any battery range. It is the sole responsibility of the consumer to choose the right battery and/or batteries.
|